Formulation : Quand les polymères servent d'additifs = Formulatio: When polymers used as additivesGLOTIN, M; BOUILLOUX, A.Caoutchoucs & plastiques (Paris). 1999, Num 782, pp 29-30, issn 1154-1105Article

Thermal Stability of Lubricating Oil Additives Based on Styrene and n-Alkyl Methacrylate TerpolymersJUKIC, Ante; ROGOSIC, Marko; VIDOVIC, Elvira et al.Polymer-plastics technology and engineering (Softcover ed). 2010, Vol 49, Num 1-3, pp 74-77, issn 0360-2559, 4 p.Article

Lubricating Oil Additives Based on PolyalkylpolyaminesAHMED, Nehal S; NASSAR, Amal M.International journal of polymeric materials (Print). 2009, Vol 58, Num 1-3, pp 178-190, issn 0091-4037, 13 p.Article

Effects of reactive low-profile additives on the volume shrinkage and internal pigmentability for low-temperature cure of unsaturated polyesterDONG, Jyh-Ping; CHIU, Sheng-Guey; HSU, Mann-Wen et al.Journal of applied polymer science. 2006, Vol 100, Num 2, pp 967-979, issn 0021-8995, 13 p.Article

The behavior of α-olefins butyl acrylate copolymers as viscosity index improvers and pour point depressants for lube oilNASSAR, Amal M; AHMED, Nehal S.International journal of polymeric materials (Print). 2006, Vol 55, Num 10-12, pp 947-955, issn 0091-4037, 9 p.Article

Studies on antiscaling effect of polyacrylic acid on boilerMISHRA, S; SAXENA, P; DEORE, D. A et al.Polymer-plastics technology and engineering (Softcover ed). 2005, Vol 44, Num 8-9, pp 1389-1398, issn 0360-2559, 10 p.Article

A novel product concept-silicone gum pellets as additives for thermoplastsHAGER, Rudolf; GECK, Michael; FUHRMANN, Oliver et al.International plastics additives and modifiers conference. 2004, pp 123-130, isbn 1-85957-451-3, 1Vol, 8 p.Conference Paper

Control of permselectivity with surface modifications of poly[1-(trimethylsilyl)-1-propyne] membranesURAGAMI, T; DOI, T; MIYATA, T et al.International journal of adhesion and adhesives. 1999, Vol 19, Num 5, pp 405-409, issn 0143-7496Conference Paper

Métallocènes, améliorer leur mise en oeuvre : Films PE = Metallocenes, to improve processing parametersFANICHET, X.Plastiques modernes et élastomères. 1999, Vol 51, Num 9, pp 13-17, issn 0032-1303, 4 p.Article

Degradation of Poly(ethylene glycol) by Electrolysis During the Cu Electroplating: A Combined Experimental and Density Functional Theory StudyYONG SUN WON; CHO, Donghyun; KIM, Yunhee et al.Journal of applied polymer science (Print). 2010, Vol 117, Num 4, pp 2083-2089, issn 0021-8995, 7 p.Article

Effect of a poly(dimethylsiloxane) modified polyolefin additive on the processing and surface properties of LLDPEZHU, S.-H; MCMANUS, N. T; TZOGANAKIS, C et al.Polymer engineering and science. 2007, Vol 47, Num 9, pp 1309-1316, issn 0032-3888, 8 p.Article

Influence of poly(ethylene glycol)-containing additives on extrusion of ultrahigh molecular weight polyethylene/polypropylene blendMEIJU XIE; XIAOLONG LIU; HUILIN LI et al.Journal of applied polymer science. 2006, Vol 100, Num 2, pp 1282-1288, issn 0021-8995, 7 p.Article

Synthesis of novel bifunctional hindered amine-UV absorber polymer stabilizersBOJINOV, Vladimir B.Polymer degradation and stability. 2006, Vol 91, Num 1, pp 128-135, issn 0141-3910, 8 p.Article

Preparation and evaluation of some lube oil additives based on polyethylene glycolNEHAL SABRY AHMED.International journal of polymeric materials (Print). 2006, Vol 55, Num 10-12, pp 761-771, issn 0091-4037, 11 p.Article

The effect of the physico-chemical properties of cellulosic polymers on the Si wafer polishing processKIM, Sang-Kyun; KIM, Ye-Hwan; PAIK, Ungyu et al.Journal of electroceramics. 2006, Vol 17, Num 2-4, pp 835-839, issn 1385-3449, 5 p.Conference Paper

ÊPhase-separation mechanism and corresponding final morphologies of thermoset blends based on unsaturated polyester and low-molar-weight saturated polyesterBOYARD, N; VAYER, M; SINTUREL, Ch et al.Journal of applied polymer science. 2005, Vol 95, Num 6, pp 1459-1472, issn 0021-8995, 14 p.Article

A regular, hydrophobically modified polyampholyte as novel pour point depressantKUDAIBERGENOV, Sarkyt E; DIDUKH, Alexander G; IBRAEVA, Zhanar E et al.Journal of applied polymer science. 2005, Vol 98, Num 5, pp 2101-2108, issn 0021-8995, 8 p.Article

Effects of reactive low-profile additives on the properties of cured unsaturated polyester resins. I. Volume shrinkage and internal pigmentabilityDONG, Jyh-Ping; LEE, Jeng-Huei; LAI, Duen-Horng et al.Journal of applied polymer science. 2005, Vol 98, Num 1, pp 264-275, issn 0021-8995, 12 p.Article

Hindered amine stabilizers investigated by the use of packed capillary temperature programmed liquid chromatography. II : Poly-N-(3-hydroxyethyl-2,2,6,6-tetramethyl-4-hydroxypiperidyl succinate)TRONES, Roger; ANDERSEN, Thomas; HEGNA, Dag R et al.Journal of chromatography. 2000, Vol 902, Num 2, pp 421-426, issn 0021-9673Article

Thermal and surface analytical study of flame retarded polyolefins. I. Interaction of additives and structure formationMAROSI, G; CSONTOS, I; RAVADITS, I et al.Journal of thermal analysis and calorimetry. 1999, Vol 56, Num 3, pp 1071-1080, issn 1388-6150Conference Paper

Rheology of Lubricating Greases Modified with Reactive NCO-Terminated Polymeric AdditivesMORENO, G; FRANCO, J. M; VALENCIA, C et al.Journal of applied polymer science (Print). 2010, Vol 118, Num 2, pp 693-704, issn 0021-8995, 12 p.Article

Reciprocal influence of succinimide and oligodiene-and oligoolefin-based sulfur-containing alkylphenolsBIGLOVA, R. Z; GALIMZYANOVA, A. U; TALIPOV, R. F et al.Journal of applied polymer science. 2007, Vol 103, Num 3, pp 1842-1846, issn 0021-8995, 5 p.Article

Investigation of PPA interactions with polymer melts in single layer extrusion and coextrusion flowsZATLOUKAL, M; DE WITTE, J; LAVALLEE, C et al.Plastics, rubber and composites. 2007, Vol 36, Num 6, pp 248-253, issn 1465-8011, 6 p.Article

Effects of reactive low-profile additives on the properties of cured unsaturated polyester resins. II. Glass-transition temperature and mechanical propertiesDONG, Jyh-Ping; LEE, Jeng-Huei; LAI, Duen-Horng et al.Journal of applied polymer science. 2006, Vol 100, Num 2, pp 867-878, issn 0021-8995, 12 p.Article

Page / 3